Model CP230-1-20VFD

• 20,000 lbs. (9072 kg) running linepull
• 450 ft. of 1" rope capacity (137 m of 25 mm)
• Dual opposed winch system with variable frequency electric drives

Model CP65-1-4/1.4E

• 6,500 lbs. (2950 kg) running linepull
• 80 ft. of 5/8" rope capacity (24 m of 16 mm)
• Jaw clutch and 2 speed electric motor

Model TW400

• 40,000 lbs. (18,144 kg) running linepull
• 1-1/8" maximum wire rope diameter
• Unlimited rope length with traction winch design
• Electric or hydraulic drive available

Car Puller System: Bi-Directional for long distance pulling

The bi-directional car puller system components include a Traction Winch, similar to Model TW400, Take-Up Counterweight Tower and Return Deflector Sheave.  All components can be supplied by TIMBERLAND.

This system is ideal for applications where cars must be pulled in two directions over an extended distance.  The Counterweight Tower is required to take up any slack in the rope and maintain appropriate tail tension for the winch.

Rail Car Pulling Accessories Available

• Deflector and return sheaves / blocks (go to Sheaves & Blocks)
• Wire or synthetic rope
• Guide and deflector rollers
• Travel limit and slack cable shutdowns